can you paste the output of sho ip rip data on R1? is the next-hop of this static real? do you have this static in RIB?
Regards, Piotr 2011/10/15 Kingsley Charles <[email protected]> > Typo, I was trying to redistribute the following route on R1: > > ip route 1.2.3.0 255.255.255.0 20.10.30.40 > > > > > On Sat, Oct 15, 2011 at 9:09 AM, Kingsley Charles < > [email protected]> wrote: > >> Marko, here is my config: >> >> R1 >> >> Router(config)#ip route 10.20.30.0 255.255.255.0 20.10.30.40 >> Router(config)#router rip >> Router(config-router)#version 2 >> Router(config-router)#network 10.0.0.0 >> Router(config-router)#redistribute static* >> >> >> R2 >> * >> Router(config)#router rip >> Router(config-router)#version 2 >> Router(config-router)#network 10.0.0.0* >> >> *With regards >> Kings* >> * >> >> >> >> On Sat, Oct 15, 2011 at 4:46 AM, Marko Milivojevic >> <[email protected]>wrote: >> >>> Could you please post the relevant configurations... >>> >>> -- >>> Marko Milivojevic - CCIE #18427 >>> Senior Technical Instructor - IPexpert >>> >>> FREE CCIE training: http://bit.ly/vLecture >>> >>> Mailto: [email protected] >>> Telephone: +1.810.326.1444 >>> Web: http://www.ipexpert.com/ >>> >>> On Fri, Oct 14, 2011 at 00:02, Kingsley Charles >>> <[email protected]> wrote: >>> > It is normal configured static routes. >>> > >>> > I checked the peer's routing table and debug ip rip. >>> > >>> > With regards >>> > Kings >>> > >>> > On Fri, Oct 14, 2011 at 11:28 AM, Piotr Matusiak <[email protected]> >>> wrote: >>> >> >>> >> Is it 'normal' static or injected? >>> >> how do you see that this is not working? >>> >> do you see that prefix in sho ip rip data? >>> >> >>> >> Regards, >>> >> Piotr >>> >> >>> >> >>> >> 2011/10/14 Kingsley Charles <[email protected]> >>> >>> >>> >>> But it is the "T" in the lab :-) >>> >>> >>> >>> Thanks... >>> >>> >>> >>> >>> >>> With regards >>> >>> Kings >>> >>> >>> >>> On Thu, Oct 13, 2011 at 8:27 PM, Steve Di Bias <[email protected]> >>> wrote: >>> >>>> >>> >>>> Works OK on 12.4(24)T2. Upgrade? It is a "T" version after all ;) >>> >>>> >>> >>>> On Thu, Oct 13, 2011 at 4:29 AM, Kingsley Charles >>> >>>> <[email protected]> wrote: >>> >>>>> >>> >>>>> Hi all >>> >>>>> >>> >>>>> With 12.4(15)T13, I am not able to redistribute static routes into >>> RIP. >>> >>>>> Tried configuring with metrics also. >>> >>>>> >>> >>>>> Any known issues? >>> >>>>> >>> >>>>> With regards >>> >>>>> Kings >>> >>>>> >>> >>>>> _______________________________________________ >>> >>>>> For more information regarding industry leading CCIE Lab training, >>> >>>>> please visit www.ipexpert.com >>> >>>>> >>> >>>>> Are you a CCNP or CCIE and looking for a job? Check out >>> >>>>> www.PlatinumPlacement.com >>> >>>> >>> >>>> >>> >>>> >>> >>>> -- >>> >>>> -Steve Di Bias >>> >>> >>> >>> >>> >>> _______________________________________________ >>> >>> For more information regarding industry leading CCIE Lab training, >>> please >>> >>> visit www.ipexpert.com >>> >>> >>> >>> Are you a CCNP or CCIE and looking for a job? Check out >>> >>> www.PlatinumPlacement.com >>> >> >>> > >>> > >>> > _______________________________________________ >>> > For more information regarding industry leading CCIE Lab training, >>> please >>> > visit www.ipexpert.com >>> > >>> > Are you a CCNP or CCIE and looking for a job? Check out >>> > www.PlatinumPlacement.com >>> > >>> >> >> >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
