One last comment, make sure that the router has an active interface towards the next hop that is in the same subnet as the next hub otherwise the static route won't install in the routing table
Sent from my iPhone On Oct 15, 2011, at 1:18 AM, Pouya Taaghol <[email protected]> wrote: > 1) enable "no auto-summary" in the RIP process > 2) make sure "ip classless" is enabled globally > > Please try these and let me know > > Thanks, > Pouya. > > From: Kingsley Charles <[email protected]> > To: Marko Milivojevic <[email protected]> > Cc: [email protected] > Sent: Friday, October 14, 2011 8:39 PM > Subject: Re: [OSL | CCIE_Security] Redistributing static route in RIP > > Marko, here is my config: > > R1 > Router(config)#ip route 10.20.30.0 255.255.255.0 20.10.30.40 > Router(config)#router rip > Router(config-router)#version 2 > Router(config-router)#network 10.0.0.0 > Router(config-router)#redistribute static > > > R2 > > Router(config)#router rip > Router(config-router)#version 2 > Router(config-router)#network 10.0.0.0 > > > With regards > Kings > > > On Sat, Oct 15, 2011 at 4:46 AM, Marko Milivojevic <[email protected]> > wrote: > Could you please post the relevant configurations... > > -- > Marko Milivojevic - CCIE #18427 > Senior Technical Instructor - IPexpert > > FREE CCIE training: http://bit.ly/vLecture > > Mailto: [email protected] > Telephone: +1.810.326.1444 > Web: http://www.ipexpert.com/ > > On Fri, Oct 14, 2011 at 00:02, Kingsley Charles > <[email protected]> wrote: > > It is normal configured static routes. > > > > I checked the peer's routing table and debug ip rip. > > > > With regards > > Kings > > > > On Fri, Oct 14, 2011 at 11:28 AM, Piotr Matusiak <[email protected]> wrote: > >> > >> Is it 'normal' static or injected? > >> how do you see that this is not working? > >> do you see that prefix in sho ip rip data? > >> > >> Regards, > >> Piotr > >> > >> > >> 2011/10/14 Kingsley Charles <[email protected]> > >>> > >>> But it is the "T" in the lab :-) > >>> > >>> Thanks... > >>> > >>> > >>> With regards > >>> Kings > >>> > >>> On Thu, Oct 13, 2011 at 8:27 PM, Steve Di Bias <[email protected]> wrote: > >>>> > >>>> Works OK on 12.4(24)T2. Upgrade? It is a "T" version after all ;) > >>>> > >>>> On Thu, Oct 13, 2011 at 4:29 AM, Kingsley Charles > >>>> <[email protected]> wrote: > >>>>> > >>>>> Hi all > >>>>> > >>>>> With 12.4(15)T13, I am not able to redistribute static routes into RIP. > >>>>> Tried configuring with metrics also. > >>>>> > >>>>> Any known issues? > >>>>> > >>>>> With regards > >>>>> Kings > >>>>> > >>>>> _______________________________________________ > >>>>> For more information regarding industry leading CCIE Lab training, > >>>>> please visit www.ipexpert.com > >>>>> > >>>>> Are you a CCNP or CCIE and looking for a job? Check out > >>>>> www.PlatinumPlacement.com > >>>> > >>>> > >>>> > >>>> -- > >>>> -Steve Di Bias > >>> > >>> > >>> _______________________________________________ > >>> For more information regarding industry leading CCIE Lab training, please > >>> visit www.ipexpert.com > >>> > >>> Are you a CCNP or CCIE and looking for a job? Check out > >>> www.PlatinumPlacement.com > >> > > > > > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, please > > visit www.ipexpert.com > > > > Are you a CCNP or CCIE and looking for a job? Check out > > www.PlatinumPlacement.com > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
