Works for me now :-) Yes the next hop was a directly connected candidate and I was able to see in the RIB.
With regards Kings On Sat, Oct 15, 2011 at 3:50 PM, Piotr Matusiak <[email protected]> wrote: > can you paste the output of sho ip rip data on R1? > is the next-hop of this static real? > do you have this static in RIB? > > Regards, > Piotr > > > > 2011/10/15 Kingsley Charles <[email protected]> > >> Typo, I was trying to redistribute the following route on R1: >> >> ip route 1.2.3.0 255.255.255.0 20.10.30.40 >> >> >> >> >> On Sat, Oct 15, 2011 at 9:09 AM, Kingsley Charles < >> [email protected]> wrote: >> >>> Marko, here is my config: >>> >>> R1 >>> >>> Router(config)#ip route 10.20.30.0 255.255.255.0 20.10.30.40 >>> Router(config)#router rip >>> Router(config-router)#version 2 >>> Router(config-router)#network 10.0.0.0 >>> Router(config-router)#redistribute static* >>> >>> >>> >>> R2 >>> * >>> Router(config)#router rip >>> Router(config-router)#version 2 >>> Router(config-router)#network 10.0.0.0* >>> >>> *With regards >>> Kings* >>> * >>> >>> >>> >>> On Sat, Oct 15, 2011 at 4:46 AM, Marko Milivojevic >>> <[email protected]>wrote: >>> >>>> Could you please post the relevant configurations... >>>> >>>> -- >>>> Marko Milivojevic - CCIE #18427 >>>> Senior Technical Instructor - IPexpert >>>> >>>> FREE CCIE training: http://bit.ly/vLecture >>>> >>>> Mailto: [email protected] >>>> Telephone: +1.810.326.1444 >>>> Web: http://www.ipexpert.com/ >>>> >>>> On Fri, Oct 14, 2011 at 00:02, Kingsley Charles >>>> <[email protected]> wrote: >>>> > It is normal configured static routes. >>>> > >>>> > I checked the peer's routing table and debug ip rip. >>>> > >>>> > With regards >>>> > Kings >>>> > >>>> > On Fri, Oct 14, 2011 at 11:28 AM, Piotr Matusiak <[email protected]> >>>> wrote: >>>> >> >>>> >> Is it 'normal' static or injected? >>>> >> how do you see that this is not working? >>>> >> do you see that prefix in sho ip rip data? >>>> >> >>>> >> Regards, >>>> >> Piotr >>>> >> >>>> >> >>>> >> 2011/10/14 Kingsley Charles <[email protected]> >>>> >>> >>>> >>> But it is the "T" in the lab :-) >>>> >>> >>>> >>> Thanks... >>>> >>> >>>> >>> >>>> >>> With regards >>>> >>> Kings >>>> >>> >>>> >>> On Thu, Oct 13, 2011 at 8:27 PM, Steve Di Bias <[email protected]> >>>> wrote: >>>> >>>> >>>> >>>> Works OK on 12.4(24)T2. Upgrade? It is a "T" version after all ;) >>>> >>>> >>>> >>>> On Thu, Oct 13, 2011 at 4:29 AM, Kingsley Charles >>>> >>>> <[email protected]> wrote: >>>> >>>>> >>>> >>>>> Hi all >>>> >>>>> >>>> >>>>> With 12.4(15)T13, I am not able to redistribute static routes into >>>> RIP. >>>> >>>>> Tried configuring with metrics also. >>>> >>>>> >>>> >>>>> Any known issues? >>>> >>>>> >>>> >>>>> With regards >>>> >>>>> Kings >>>> >>>>> >>>> >>>>> _______________________________________________ >>>> >>>>> For more information regarding industry leading CCIE Lab training, >>>> >>>>> please visit www.ipexpert.com >>>> >>>>> >>>> >>>>> Are you a CCNP or CCIE and looking for a job? Check out >>>> >>>>> www.PlatinumPlacement.com >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> -- >>>> >>>> -Steve Di Bias >>>> >>> >>>> >>> >>>> >>> _______________________________________________ >>>> >>> For more information regarding industry leading CCIE Lab training, >>>> please >>>> >>> visit www.ipexpert.com >>>> >>> >>>> >>> Are you a CCNP or CCIE and looking for a job? Check out >>>> >>> www.PlatinumPlacement.com >>>> >> >>>> > >>>> > >>>> > _______________________________________________ >>>> > For more information regarding industry leading CCIE Lab training, >>>> please >>>> > visit www.ipexpert.com >>>> > >>>> > Are you a CCNP or CCIE and looking for a job? Check out >>>> > www.PlatinumPlacement.com >>>> > >>>> >>> >>> >> >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
