Hi All,
It was possible to solve the issue with much help from Jerry and Paul.
1. Bootstrap Loader as printed in the Dilog Documentation is wrong and
was fixed.
Here is the fixed and running version:
Device name = MS New =
Beginning address = 001000 New =
Last byte address = 001400 New =
Start address = 001000 New =
Highest Unit number = 1 New =
Device Description = TSV05 New =
Enter ROM ODT
xxxxxx/ = open word location xxxxxx if address even, byte if odd
RETURN = close location
. or LF = close location and open next
- = close location and open previous
ROM ODT> 001000/012700
ROM ODT> 001002/172520
ROM ODT> 001004/012701
ROM ODT> 001006/172522
ROM ODT> 001010/005011
ROM ODT> 001012/105711
ROM ODT> 001014/100376
ROM ODT> 001016/012710
ROM ODT> 001020/001064
ROM ODT> 001022/105711
ROM ODT> 001024/100376
ROM ODT> 001026/012710
ROM ODT> 001030/001104
ROM ODT> 001032/105711
ROM ODT> 001034/100376
ROM ODT> 001036/012710
ROM ODT> 001040/001104
ROM ODT> 001042/105711
ROM ODT> 001044/100376
ROM ODT> 001046/005711
ROM ODT> 001050/100421
ROM ODT> 001052/012704
ROM ODT> 001054/001102
ROM ODT> 001056/005000
ROM ODT> 001060/005007
ROM ODT> 001062/046523
ROM ODT> 001064/140004
ROM ODT> 001066/001074
ROM ODT> 001070/000000
ROM ODT> 001072/000010
ROM ODT> 001074/001116
ROM ODT> 001076/000000
ROM ODT> 001100/000016
ROM ODT> 001102/000000
ROM ODT> 001104/140001
ROM ODT> 001106/000000
ROM ODT> 001110/000000
ROM ODT> 001112/001000
ROM ODT> 001114/000000
ROM ODT> 001116/000000
Boot Process:
Message 04 Entering Dialog mode
Commands are Help, Boot, List, Setup, Map and Test.
Type a command then press the RETURN key: B MS0
Trying MS0MSBOOT V05.04
▒*
2. The issues I had after the Bootstrap was fixed where related to my
cable, where I had overall three Pins with bad/no contact depending on
the cable movement.
Outcome:
Type a command then press the RETURN key: B MS0
Trying MS0
001116
@
.dir ms0:
?DIR-F-Error reading directory
COPY MS0: NL:
?PIP-F-Directory input error MS0:
2.1 Debugging via:
Examine 1116 +7:
@001116/100022
@001120/000012
@001122/000000
@001124/000310
@001126/000001
@001130/100000
@001132/000000
@001134/000000
Extended Status 0 at 001124 seams to be OK, as 000310 can be mapped to: motion,
on-line, phase-encoded drive
Extended Status 1 at 001126 seams to be not OK, as 1 means read data Parity
error
Related Pin's:
Connector P1: 14
Connector P2: 8, 32
So I'm quite happy to have a running Pertec 1/2" drive.
Again many thanks and Greetings
Ulrich
