I sent this to the cdrecord-support email addreess but got no response.... Let me know if I should be posting this somewhere else. Please copy any response to this email address. Thank you much... -james
I am using cdrecord 1.11a12 on a RedHat Linux 7.2 machine with kernel version 2.4.7-10. I have a Dell Dimension XPS T450 (Pentium 3@450) with 384 MB of RAM. I am trying to burn on an HP8200i drive. I was able to successfully burn before I installed the new version of RedHat. I am not sure if it is the kernel or the setup. I CAN burn TAO, but not DAO. I get the same error (see below) regardless of the speed I burn at. Here is the output from cdrecord: # cdrecord -dao -pad -v -dummy -speed=4 *.wav Cdrecord 1.11a12 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J�rg Schilling TOC Type: 0 = CD-DA scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.19 Using libscg version 'schily-0.5' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'HP ' Identifikation : 'CD-Writer+ 8200 ' Revision : '1.0f' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R Drive buf size : 2086656 = 2037 KB FIFO size : 4194304 = 4096 KB Track 01: audio 53 MB (05:15.32) no preemp Track 02: audio 125 MB (12:24.96) no preemp Track 03: audio 155 MB (15:22.53) no preemp Track 04: audio 235 MB (23:18.36) no preemp Track 05: audio 87 MB (08:42.16) no preemp Total size: 656 MB (65:03.33) = 292750 sectors Lout start: 656 MB (65:05/25) = 292750 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is not unrestricted Is not erasable Disk sub type: Medium Type A, high Beta category (A+) (3) ATIP start of lead in: -11849 (97:24/01) ATIP start of lead out: 359849 (79:59/74) Disk type: Long strategy type (Cyanine, AZO or similar) Manuf. index: 25 Manufacturer: Taiyo Yuden Company Limited Blocks total: 359849 Blocks current: 359849 Blocks remaining: 67099 Starting to write CD/DVD at speed 4 in dummy mode for single session. Last chance to quit, starting dummy write in 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Sending CUE sheet... cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 Track 01: 1 of 53 MB written (fifo 100%).cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 02 D9 00 00 1B 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 64 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.014s timeout 200s write track data: error after 1714608 bytes Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00 Writing time: 17.430s Fixating... WARNING: Some drives don't like fixation in dummy mode. cdrecord: Input/output error. flush cache: scsi sendcmd: no error CDB: 35 00 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 2C 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.002s timeout 200s Trouble flushing the cache Fixating time: 0.005s cdrecord: fifo had 91 puts and 28 gets. cdrecord: fifo was 0 times empty and 11 times full, min fill was 95%. As you can see I am getting an "invalid mode for this track" error. I have searched high and low on the web and the deja newsgroups and have not found a solution to this problem. I am sure I am probably overlooking something very simple but I have gone over this stuff several times and am at a dead end. Oh, FWIW, I can burn okay with this hardware in windows (and as I said it worked before with an older version of RedHat) so I know the HW is okay. Any help is greatly appreciated. Thank you for your time, James Shamas __________________________________________________ Do You Yahoo!? Check out Yahoo! Shopping and Yahoo! Auctions for all of your unique holiday gifts! Buy at http://shopping.yahoo.com or bid at http://auctions.yahoo.com ------------------------------------------------------- _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
