>From: James Shamas <[EMAIL PROTECTED]>
>I am using cdrecord 1.11a12 on a RedHat Linux 7.2
>machine with kernel version 2.4.7-10. I have a Dell
>Dimension XPS T450 (Pentium 3@450) with 384 MB of RAM.
> I am trying to burn on an HP8200i drive.
What is the manufacturer of this drive?
>I was able to successfully burn before I installed the
>new version of RedHat. I am not sure if it is the
>kernel or the setup. I CAN burn TAO, but not DAO. I
>get the same error (see below) regardless of the speed
>I burn at.
>Here is the output from cdrecord:
># cdrecord -dao -pad -v -dummy -speed=4 *.wav
>Cdrecord 1.11a12 (i686-pc-linux-gnu) Copyright (C)
>1995-2001 J�rg Schilling
>TOC Type: 0 = CD-DA
>scsidev: '0,0,0'
>scsibus: 0 target: 0 lun: 0
>Linux sg driver version: 3.1.19
>Using libscg version 'schily-0.5'
>atapi: 1
>Device type : Removable CD-ROM
>Version : 0
>Response Format: 1
>Vendor_info : 'HP '
>Identifikation : 'CD-Writer+ 8200 '
>Revision : '1.0f'
>Device seems to be: Generic mmc CD-RW.
>Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
>Driver flags : SWABAUDIO
>Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
>Drive buf size : 2086656 = 2037 KB
>FIFO size : 4194304 = 4096 KB
>Track 01: audio 53 MB (05:15.32) no preemp
>Track 02: audio 125 MB (12:24.96) no preemp
>Track 03: audio 155 MB (15:22.53) no preemp
>Track 04: audio 235 MB (23:18.36) no preemp
>Track 05: audio 87 MB (08:42.16) no preemp
>Total size: 656 MB (65:03.33) = 292750 sectors
>Lout start: 656 MB (65:05/25) = 292750 sectors
>Current Secsize: 2048
>ATIP info from disk:
> Indicated writing power: 4
> Is not unrestricted
> Is not erasable
> Disk sub type: Medium Type A, high Beta category
>(A+) (3)
> ATIP start of lead in: -11849 (97:24/01)
> ATIP start of lead out: 359849 (79:59/74)
>Disk type: Long strategy type (Cyanine, AZO or
>similar)
>Manuf. index: 25
>Manufacturer: Taiyo Yuden Company Limited
>Blocks total: 359849 Blocks current: 359849 Blocks
>remaining: 67099
>Starting to write CD/DVD at speed 4 in dummy mode for
>single session.
>Last chance to quit, starting dummy write in 0
>seconds. Operation starts.
>Waiting for reader process to fill input buffer ...
>input buffer ready.
>Sending CUE sheet...
>cdrecord: WARNING: Drive returns wrong startsec (0)
>using -150
>Writing pregap for track 1 at -150
>Starting new track at sector: 0
>Track 01: 1 of 53 MB written (fifo 100%).cdrecord:
>Input/output error. write_g1: scsi sendcmd: no error
>CDB: 2A 00 00 00 02 D9 00 00 1B 00
>status: 0x2 (CHECK CONDITION)
>Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 64 00
>00 00
>Sense Key: 0x5 Illegal Request, Segment 0
>Sense Code: 0x64 Qual 0x00 (illegal mode for this
>track) Fru 0x0
>Sense flags: Blk 0 (not valid)
>cmd finished after 0.014s timeout 200s
Without better information I must assumethat this is a result
of a firmware bug.
J�rg
EMail:[EMAIL PROTECTED] (home) J�rg Schilling D-13353 Berlin
[EMAIL PROTECTED] (uni) If you don't have iso-8859-1
[EMAIL PROTECTED] (work) chars I am J"org Schilling
URL: http://www.fokus.gmd.de/usr/schilling ftp://ftp.fokus.gmd.de/pub/unix
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
