Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
I've done most of my POR parts by sandblasting first. I follow 3 steps and have had excellent results so far. After blasting I spray down the part with POR Marine Clean, then followup with POR Metal Ready, and after the copper colored coating is visible from the metal ready I apply the POR-15. JeffK ACES #1510 Team Chevelle Gold #72 www.72chevelle.com ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, February 08, 2002 7:43 PM Subject: RE: [Chevelle-List] POR-15 > > Replies to this message are sent to The Chevelle Mailing List > ------------------------------------------------------------ > > > what about sandblasted surfaces? > > > Should work ok, but you may want to research it at > > http://www.por15.com/ > > .Denny > > ----------------------------------------------------- > To Unsubscribe please visit www.chevelles.net/list.html > To start a new topic, send mail to: [EMAIL PROTECTED] > > ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
