Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
SO THE 2-PART EPOXY PRIMER WITH A URETHANE TOP COAT, (ASSUMING A SANDBLASTED SUBSTRATE) IS MORE DURABLE THAN POR-15? WHAT IS THE AGGRAVATION FACTOR OF THIS PROCESS VS. POR-15? JOE BANKS AZTECH MOLD & DIE STEEL 602-257-2300 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Bill Vander Werf Sent: Wednesday, February 13, 2002 7:36 PM To: [EMAIL PROTECTED] Subject: Re: [Chevelle-List] POR-15 Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------ DP40LF is a two part epoxy primer made by PPG. Actually, I prefer DP90LF which is the same product in black. Then I would use a urethane black over it. The nice thing about using a urethane black is you can choose your level of gloss. Bill Vander Werf aztechsteel wrote: > Replies to this message are sent to The Chevelle Mailing List > ------------------------------------------------------------ > > DP40LF? > > JOE BANKS > AZTECH MOLD & DIE STEEL > 602-257-2300 > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of > [EMAIL PROTECTED] > Sent: Tuesday, February 12, 2002 10:33 PM > To: [EMAIL PROTECTED] > Subject: Re: [Chevelle-List] POR-15 > > ------------------------------------------------------------ > > i don't like the por 15 products myself, i like sandblast, dp40LF, and a > good coat of black urethane myself. ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED] ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
