Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
I forgot the rinse step. Yes, you need to rinse off the Degrease and Metal Ready with water. Even though it's rinsed, it will still leave a gold colored tint behind. I believe this is a zinc coating. If you look at the frame pics on my website, the first picture is with the metal ready rinsed off. JeffK ACES #1510 Team Chevelle Gold #72 www.72chevelle.com ----- Original Message ----- From: "pablo" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, February 09, 2002 8:42 AM Subject: Re: [Chevelle-List] POR-15 > > Replies to this message are sent to The Chevelle Mailing List > ------------------------------------------------------------ > > Thanks for breaking down those step like you did Jeff; because I have been > wondering about using that metal ready. I have asked and researched, and > beforehand been told that you have to rinse the metal ready after using it; > before applying the POR15. > > By your description it seems that you leave it and paint over it, or am I > not understanding what you meant ? Anyway I painted over it and have until > now thought I should have hosed it off. > > Since I am "still" not sure, how do you all see it ? > > pem > > ----- Original Message ----- > From: "JeffK" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Friday, February 08, 2002 9:52 PM > Subject: Re: [Chevelle-List] POR-15 > > > > > > Replies to this message are sent to The Chevelle Mailing List > > ------------------------------------------------------------ > > > > I've done most of my POR parts by sandblasting first. I follow 3 steps and > > have had excellent results so far. After > > blasting I spray down the part with POR Marine Clean, then followup with > POR > > Metal Ready, and after the copper > > colored coating is visible from the metal ready I apply the POR-15. > > > > JeffK ACES #1510 > > Team Chevelle Gold #72 > > www.72chevelle.com > > > > > > ----- Original Message ----- > > From: <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Friday, February 08, 2002 7:43 PM > > Subject: RE: [Chevelle-List] POR-15 > > > > > > > > > > Replies to this message are sent to The Chevelle Mailing List > > > ------------------------------------------------------------ > > > > > > > > > what about sandblasted surfaces? > > > > > > > > > Should work ok, but you may want to research it at > > > > > > http://www.por15.com/ > > > > > > .Denny > > > > > > ----------------------------------------------------- > > > To Unsubscribe please visit www.chevelles.net/list.html > > > To start a new topic, send mail to: [EMAIL PROTECTED] > > > > > > > > > > > > > > ----------------------------------------------------- > > To Unsubscribe please visit www.chevelles.net/list.html > > To start a new topic, send mail to: [EMAIL PROTECTED] > > > > > > ----------------------------------------------------- > To Unsubscribe please visit www.chevelles.net/list.html > To start a new topic, send mail to: [EMAIL PROTECTED] > > ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
