Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
I know that Year One has the woven cover in at least 2 sizes. 1/4 & 1/2 Ithink. I got the 1/4 from them a few years ago. But check with an auto electric repair shop in your area. You may be surprised to find that many have that kind of stuff. Also to clean the oil/grease off my harness, I used waterless hand cleaner. It was easy on my hands & on the wiring. rick schaefer 72 El Camino http://members.home.net/jimmy4/rick1972elky.html TPI 350-700r4 http://chevelles.com/showroom/ricks%20motor%20-L Team Chevelle # 0038 ACES #0140 On Tue, 19 Feb 2002 14:21:00 +0000 "I. M. Shrejk" <[EMAIL PROTECTED]> writes: > > Replies to this message are sent to The Chevelle Mailing List > ------------------------------------------------------------ > > Has anyone had any experience in refurbishing the main wiring > harness under > the hood? Mine was in pretty good shape despite the fact that it is > over 30 > years old and essentially only needed to be rewrapped with > electrical tape. > > At several locations, there are wires covered with a woven material > to > insulate them from manifold heat. One is between the starter and > the fire > wall. Another is to the temperature sensor. > > Does anyone know a supplier for the insulation? > > _________________________________________________________________ > MSN Photos is the easiest way to share and print your photos: > http://photos.msn.com/support/worldwide.aspx > > > ----------------------------------------------------- > To Unsubscribe please visit www.chevelles.net/list.html > To start a new topic, send mail to: [EMAIL PROTECTED] ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
