----- Original Message -----
Sent: Tuesday, February 26, 2002 9:31
AM
Subject: Re: [Chevelle-List] 327 /
350
sounds like a good kid ya
got there Rhonda,
chances are he'll have ta get a differnt intake manifold as the center bolts
are at a different angle.
Have you'r son get the
casting #'s off the heads and then post them on the list and somebody will
pop-up
with all the spec's about
them he'll need ta know.....
----- Original Message -----
Sent: Monday, February 25, 2002 7:41
PM
Subject: [Chevelle-List] 327 /
350
Hi all,
My son just got a really good deal on some heads for his
66 chevelle and wants me to help him with them.
Question: he has the original 1966 327
motor.
He picked up rebuilt heads from a 1991
350 motor. Looks like they will bolt up no problem.
I know Fords 360 and 390 motors are the same motor just
different stroke. Is that the same deal with the Chevy 327
and 350?
Were there any design changes to the
heads during those 25yrs to accommodate smog equipment that I
should know about ?. and will they run Good on the 327
block or vise versa??
He's put in a new Cam, lifters, push rods, HEI
ignition, headers, 4 barrel Edlebrock, and High performance manifold.
(He's been really good about saving and storing all
the original parts - so that's not a problem).
He does plan on storing the 327 heads until the
lower end needs work and doing a complete out of car
rebuild. The car is running great right now - it just has an
elusive top end tick that's driving him crazy and he's tired of looking for
lead additives whenever he fills the tank.
Any help would be appreciated,
Rhonda Stalker
San Diego, Ca
