Yes -- after you've put everything back together and had the engine running, re-check all the intake bolts after a few days. They do tend to loosen up initially.
-Dave, [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Jeff Fischer Sent: Thursday, April 04, 2002 10:21 AM To: [EMAIL PROTECTED] Subject: [Chevelle-List] Tips on intake manifold gasket I have decided to put on a new Edelbrock carb on my poorly running '71 454. This is the car that as it turned out had a carb on it that was shown to be for a 1972 chevy 350 pickup! Anyway, I want to replace the intake manifold gasket at the same time but have never done so. I have the service manual and it shows the torque sequence and the torque at 30 ft pounds. Any tips or suggestions on this gasket replacement? -- Jeff Fischer Lake Elmo, MN '71 Chevelle SS, 454, 4 spd http://home.attbi.com/~addss/chevelle.html ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED] ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
