Tony. What you do is pull the valve cover on the 1,3,5,7 side ( driver) look at you rocker arms. From the front to the rear the frist rocker is #1 Exhaust and the 2nd rockere is #1 Intake Tap you engine around with the starter . The #1 Exhaust will open &close then the will open and close.As it's closing start watching you dampner .As it comes around to youe timing tab. At 0deg, on the tabe you will be TDC #1 firing position . You do not have to pull the HEAD.
Wayne ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, April 05, 2002 9:39 AM Subject: Re: [Chevelle-List] Tips on intake manifold gasket > OK: What is the best way to determine TDC for Cylinder 1 if the distributor > was pulled prior to marking or if you are putting in a new one? Do you pull > the head and manually crank it? > > Tony Gray > > ----------------------------------------------------- > To Unsubscribe please visit www.chevelles.net/list.html > To start a new topic, send mail to: [EMAIL PROTECTED] > ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
