Re: [Chevelle-list] Header removal

[Eddie Bumgarner]

the motor has to be raised about 8-12 in.

Dwayne & Carla Fleury <[EMAIL PROTECTED]> wrote:

You might want to try a rotary tool to cut off those headers

I have a dremel tool and its one of the best tools in the box

use some of the high speed cutting disk it will take a few of them but it will do the job'

fleury

----- Original Message -----

From: LandMMilano

To: The Chevelle Mailing List

Sent: Thursday, February 19, 2004 3:46 PM

Subject: Re: [Chevelle-list] Header removal

Believe me I have thought that many times, but I don't have a cutting torch available.  I guess I could rent one.

----- Original Message -----

From: Mark Weber

To: The Chevelle Mailing List

Sent: Thursday, February 19, 2004 4:34 PM

Subject: RE: [Chevelle-list] Header removal

Maybe you should cut them up to get them off, if they are old crap?  Perhaps your new headers are a different shape and might slide in?  Just an idea.  Don't kill yourself trying to get aftermarket cheap crap headers off!

Mark

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of LandMMilano
Sent: Thursday, February 19, 2004 4:28 PM
To: [EMAIL PROTECTED]
Subject: Fw: [Chevelle-list] Header removal

Tried removing the old filter and still no luck.  It appears that it may come out from the bottom the best.  The clutch linkage is the only thing I can see holding it back.  I am def. not a pro with anything to do with clutches so is there anything I should look out for taking the linkage apart.  You are right, I do NOT want to have to take the head off.  They are some kind of aftermarket cheap crap header, two of the four pipes were smashed about half closed so I have some Hooker's in the box waiting to go on it.  

----- Original Message -----

From: LandMMilano

To: [EMAIL PROTECTED]

Sent: Thursday, February 19, 2004 3:32 PM

Subject: [Chevelle-list] Header removal

I have a 69 4spd big block and I am having a rough time getting the driver's side header off.  The passenger side came out from the bottom, but the driver's side hits the clutch, steering, etc. so, unbolted motor and moved steering column out of way and it still will not come out the top.  Any secrets I am missing? 

---

Do you Yahoo!?
Yahoo! Mail SpamGuard - Read only the mail you want.