Hiya, This is a used shifter, so I don't have that tool, but From what I have just read on Hurst's site, I do see what you are talking about now.
Oh by the way, I see the check here that I still need to send you (dooh!). Be out in the morning .... thanks again. -Graham. Quoting Mike Holleman <[EMAIL PROTECTED]>: > Graham, there should be a line up hole thru the center of the shifter. > Hurst > provides a plastic line up pin but a drill bit or allen wrench will work. > All three shafts should be centered with the pin slid in place and then > adjust your linkage arms to fit into their holes. No guess work. > Mike > ----- Original Message ----- > From: "GP Wooden" <[EMAIL PROTECTED]> > To: "The Chevelle Mailing List" <[EMAIL PROTECTED]> > Sent: Tuesday, March 02, 2004 4:35 PM > Subject: [Chevelle-list] M20 in neutral > > > > Hi Folks, > > > > I am about to hook up my Hurst shifter to my M20, but cannot remember(nor > find > > documentation) on when the tranny is in Neutral. I need to know the > lever's > > positions. I think the main 2 are up straight and in middle position. > But > > what about the third one, the one towards the tail? That one is either > forward > > or backwards. Can someone confirm the three lever's positions? > > > > many thanks, > > > > -G. > > > > -- > > Graham Wooden, RHCE > > [EMAIL PROTECTED] > > http://www.projectchevelle.com/ > > > > > > > -- Graham Wooden, RHCE [EMAIL PROTECTED]
