We have built a lab with a Cisco GSR 12008 and 3 3750ME-24TE's. I am running version 12.2(37)SE1 on all switches
GSR---SW1----SW2---SW3 I cannot get the 3750 to enable MPLS on the FastEthernet port SWITCH interface FastEthernet1/0/1 no switchport ip address x.x.x.x subnet ip flow ingress mpls label protocol ldp mpls ip SW1.MPLS#sh mpls interfaces Interface IP Tunnel BGP Static Operational FastEthernet1/0/1 No No No No No FastEthernet1/0/2 No No No No No I have set the system MTU to 1546 on all switches. -system mtu routing 1546 enabling JUMBO MTU size 9000 doesn't show up in the config once entered. I have also tried to enable the MPLS IP MTU 9000 on the interface, this command is accepted but not shown in the config as well. Has anyone had much luck forming MPLS neighbors on these switches and if so any help would be appreciated. //CL _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
