Adam Greene wrote: > Steve, > > As far as I can tell, I'm not receiving an IP address. Yes, I'm > performing reachability tests directly from the router.
You are right, it appears as though you may not be getting an IP. I have two ADSL connections bonded on one router, here is what I see on my first ATM int: lanx#sh atm int atm0/0 Interface ATM0/0: AAL enabled: AAL5 AAL2, Maximum VCs: 23, Current VCCs: 1 VCIs per VPI: 256, Max. Datagram Size: 4528 PLIM Type: ADSL - 800Kbps Upstream, DMT, TX clocking: LINE 27 input, 8 output, 302134 IN fast, 43731 OUT fast Avail bw = 800 Config. is ACTIVE Now, for all intents and purposes, it looks as if sync is fine. I will send you off-list a test username and password to swap out to see if things work on my network. Steve _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
