Siva Valliappan wrote: > iirc DSL line scrambling should be negotiated between the DSL interfaces. > so if it is on or off it shouldn't matter.
Scrambling is not "negotiated" it's either on or off. It's also not done at the PVC level, but rather the interface level. It may be true that some devices may auto-sense scrambling, but I've found that not to be the case on Cisco devices. They have to be implicitly told to use ATM payload-scrambling. I recently just ran into a case where I found out a IAD2431 with dual T1's, support ATM, but not payload scrambling. So if your ISP/LEC uses ATM scrambling, and your device doesn't allow you to enable it... good luck. If there is a scrambling mis-match on either of the PVC... it won't work... period. -- Robert Blayzor INOC [EMAIL PROTECTED] http://www.inoc.net/~rblayzor/ > SELECT * FROM users WHERE clue > 0 0 rows returned _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
