On Fri Jan 04, 2008 at 04:40:11PM +0800, Dracul wrote: > interface FastEthernet0/14 > switchport trunk encapsulation dot1q > switchport trunk native vlan 100 > switchport mode trunk > switchport nonegotiate > end > > There are two VLANs used in the network VLAN 1 and VLAN 100. what we are > looking at is the VLAN 100
So you're trying to put the Amino STB in VLAN 100? Try this instead: interface FastEthernet0/14 switchport mode access switchport access vlan 100 spanning-tree portfast At the moment you've got it configured as a trunk port, with non-tagged frames being put in vlan 100. Whilst this shouldn't cause a problem, you can simplify it by configuring it as an access port instead. Simon _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
