On (2008-01-14 20:21 +0100), Peter Rathlev wrote: > The WS-X6748-GE-TX is a LAN card, so you can't really compare it to > SPAs. If you need more advanced features than just switching (and what > the PFC gives you), and still need to port density, you should look at > the Ethernet Services modules instead, like ES20-GE3C. It gives you 20 > GigabitEthernet ports (SFP) and PXF processing.
Just small tip that might surprise SIP/SPA folks, ES20 does not, at this time support VLAN local significance in subinterfaces, when using single tags. this is no go int giga1/0/1.42 encap dot1q 42 int giga1/0/2.42 encpp dot1q 42 Add 2nd (Qinq) tag to the interfaces, and it works. You can workaround this to some level by using EVC config and unique SVI's, but you lose some features with SVI, such as only MQC match supported today is CoS. -- ++ytti _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
