On Mon, 2008-01-14 at 22:44 +0200, Saku Ytti wrote: > Just small tip that might surprise SIP/SPA folks, ES20 does not, at this > time support VLAN local significance in subinterfaces, when using > single tags. > > this is no go > int giga1/0/1.42 > encap dot1q 42 > int giga1/0/2.42 > encpp dot1q 42
Yeah, that's the same with LAN cards, and I think OSMs too. A little retarded, it seems the switch/router has to use an internal VLAN that's exactly the same at the dot1q tag. It would be nice if one could choose which internal VLAN to use for a specific subinterface. > Add 2nd (Qinq) tag to the interfaces, and it works. You can workaround > this to some level by using EVC config and unique SVI's, but you lose > some features with SVI, such as only MQC match supported today is CoS. Only CoS match, also for Ethernet Services? I actually thought it could do "anything" in policy maps, except maybe for making coffee. :-) Regards, Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
