Couple of days ago. router# Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp- IPSERVICES-M), Version 12.2(33)SRC, RELEASE SOFTWARE (fc3) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc. Compiled Fri 11-Jan-08 09:42 by prod_rel_team
ip route static bfd GigabitEthernet3/2 172.16.1.2 However this makes me unhappy: router#conf t Enter configuration commands, one per line. End with CNTL/Z. router(config)#vlan 200 router(config-vlan)#bfd ? % Unrecognized command Phil On Jan 17, 2008, at 1:38 PM, Arie Vayner (avayner) wrote: > BFD for static routes is supported in SRC, which should be out in a > day > or two (if they keep their promise ;-) ) > http://www.cisco.com/en/US/products/ps6922/prod_release_note09186a00806c > 096f.html#wp4248936 > > Arie > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Phil Bedard > Sent: Wednesday, January 09, 2008 19:37 PM > To: [email protected] > Subject: [c-nsp] BFD for static routes > > Is there BFD support for static routes on anything besides IOS > XR? > Is there a timeline for such support? > > Phil > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
