>is it possible to combine both SVI(for ip routing) and >a subinterface(for EoMPLS) upon common >interface configured as a trunk on 67xx LAN card?
Look up "mux-uni". <http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/g uide/pfc3mpls.html#wp1406020> >In other words is following configuration ok? >interface GigabitEthernet1/1 > switchport > switchport trunk encapsulation dot1q > switchport mode trunk > switchport trunk allowed vlan 10,20 >interface GigabitEthernet1/1.20 > encapsulation dot1Q 20 > xconnect 1.2.3.4 1 encapsulation mpls You must use a seperate subinterface "vlan" than you are allowing across the trunk port. -- Regards Christian Bering IP engineer, nianet a/s Phone: (+45) 7020 8730 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
