Colleagues, is it possible to combine both SVI(for ip routing) and subinterface(for EoMPLS) upon common interface configured as a trunk on 67xx LAN card? In other words is following configuration ok?
interface GigabitEthernet1/1 switchport switchport trunk encapsulation dot1q switchport mode trunk switchport trunk allowed vlan 10,20 interface GigabitEthernet1/1.20 encapsulation dot1Q 20 xconnect 1.2.3.4 1 encapsulation mpls interface Vlan 10 ip address 4.3.2.1 255.0.0.0 Thanks. -- Alex. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
