On Fri, Apr 18, 2008 at 05:03:01PM +0300, Hank Nussbacher wrote:
> >For the GE ports on NPE-G1 you can expect around [EMAIL PROTECTED], for
> >the traffic going from/to GE port on NPE-G1 to C7200-I/O-GE it's
> >close to [EMAIL PROTECTED], and going from/to PA-GE it's only around
> >[EMAIL PROTECTED] That'll depend on features, IOS train and the traffic
> >characteristics of course but those are the baselines for empty
> >config with CEF and 12.1 train. 12.2S and latest 12.4(15)T rebuilds
> >should get better performance in the same scenario.
> >
> >PA-GE to PA-GE traffic maxes out at around [EMAIL PROTECTED] with NPE-G1
> >and NPE-400 - so it's not limitation of CPU engine but a bus
> >limitation.
>
> I need PA-GE to C7200-I/O-GE connectivity. For 1500 bytes, what is the
> kpps one can expect for PA-GE to C7200-I/O-GE connectivity? IOS train is
> 12.4(12) but can be upgraded if we know there is better performance at a
> later version.
Based on what I have seen, you will start dropping packets at around
400Mbps. I saw that on 12.4(12), didn't test other builds as we had a
lower-traffic link that could be swapped onto the PA-GE.
--
Ross Vandegrift
[EMAIL PROTECTED]
"The good Christian should beware of mathematicians, and all those who
make empty prophecies. The danger already exists that the mathematicians
have made a covenant with the devil to darken the spirit and to confine
man in the bonds of Hell."
--St. Augustine, De Genesi ad Litteram, Book II, xviii, 37
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
