Hello folks, I just started running in to this error when doing a "copy run start" command on my 7206VXR:
============== copy run start Destination filename [startup-config]? Building configuration... % Warning: Saving this config to nvram may corrupt any network management or security files stored at the end of nvram. Continue? [no]: no % Configuration buffer full, can't add command: ntp clock-period 17179886 %Aborting Save. Compress the config, Save it to flash or Free up space on device[OK] ============== I've saved my running config to disk0 and to an off site FTP server, but I'm stumped about how to get the running config to be saved to the "startup-config" in nvram... Our config is pretty large because we have over 1000 VCI's configured on an ATM DS3 card. Any help would be wonderful! Thanks, -Nick Voth _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
