Thanks Jared. I discovered that right after I sent the message. It definitely works.
I may have to find a way to load the config from flash instead of nvram in the future, but compressing it seems to have worked in the sort term. Thanks very much, -Nick Voth > From: Jared Mauch <[EMAIL PROTECTED]> > Date: Mon, 28 Apr 2008 16:48:50 -0400 > To: Nick Voth <[EMAIL PROTECTED]> > Cc: <[email protected]> > Subject: Re: [c-nsp] Configuration buffer on 7206 > > conf t > service compress-config > end > wr > > - Jared > > On Mon, Apr 28, 2008 at 02:39:28PM -0600, Nick Voth wrote: >> Hello folks, >> >> I just started running in to this error when doing a "copy run start" >> command on my 7206VXR: >> >> ============== >> copy run start >> Destination filename [startup-config]? >> Building configuration... >> >> % Warning: Saving this config to nvram may corrupt any network management or >> security files stored at the end of nvram. >> Continue? [no]: no >> % Configuration buffer full, can't add command: ntp clock-period 17179886 >> %Aborting Save. Compress the config, Save it to flash or Free up space on >> device[OK] >> ============== >> >> I've saved my running config to disk0 and to an off site FTP server, but I'm >> stumped about how to get the running config to be saved to the >> "startup-config" in nvram... >> >> Our config is pretty large because we have over 1000 VCI's configured on an >> ATM DS3 card. >> >> Any help would be wonderful! >> >> Thanks, >> >> -Nick Voth >> >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > > -- > Jared Mauch | pgp key available via finger from [EMAIL PROTECTED] > clue++; | http://puck.nether.net/~jared/ My statements are only mine. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
