On Apr 28, 2008, at 4:39 PM, Nick Voth wrote:
> Our config is pretty large because we have over 1000 VCI's
> configured on an
> ATM DS3 card.
If your PVC's are in large contiguous blocks with comment class/
configuration or if you're doing a lot of dynamic policies on VC's out
of RADIUS you can look at configuring your PVC's in "bulk" using the
"range pvc" directive. ie: Under yout ATM interface:
range DSL_SUBS1 pvc 2/100 2/999
ubr 1500
!
and for an exception in-range, if you have to:
pvc-in-range 2/203
oam-pvc manage
If you have thousands of PVC's in groups, this could save your
configuration from being 1000's of lines long. Also makes it easier
when you actually have to scroll through your running config! ;-)
HTH.
--
Robert Blayzor, BOFH
INOC, LLC
[EMAIL PROTECTED]
http://www.inoc.net/~rblayzor/
Mac OS X. Because making Unix user-friendly is easier than debugging
Windows.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
