Perhaps you could copy the cerf_report to somewhere else and then delete it from NVRAM, but as you can see, it's not taking up a lot of space so you better leave them all alone, especially after the compress-config solved your problem.
Ziv -----Original Message----- From: Nick Voth [mailto:[EMAIL PROTECTED] Sent: Tuesday, April 29, 2008 12:10 AM To: Ziv Leyes; [email protected] Subject: Re: Configuration buffer on 7206 Thanks Ziv. The comression works and here's the output of the dir nvram: Directory of nvram:/ 105 -rw- 20290 <no date> startup-config 106 ---- 27 <no date> private-config 107 -rw- 20290 <no date> underlying-config 1 ---- 32 <no date> persistent-data 2 -rw- 0 <no date> ifIndex-table 3 -rw- 1661 <no date> cerf_report Is any of that expendable? Thanks, -Nick Voth > From: Ziv Leyes <[EMAIL PROTECTED]> > Date: Mon, 28 Apr 2008 23:52:40 +0300 > To: Nick Voth <[EMAIL PROTECTED]>, "[email protected]" > <[email protected]> > Conversation: Configuration buffer on 7206 > Subject: RE: Configuration buffer on 7206 > > Did you try using "service compress-config" on the global config? > Also check what else do you have saved on the NVRAM, perhaps there is some > unnecesary file that is taking up space > Type dir nvram: and post us the output. > Ziv > > ________________________________________ > From: [EMAIL PROTECTED] [EMAIL PROTECTED] On > Behalf Of Nick Voth [EMAIL PROTECTED] > Sent: Monday, April 28, 2008 11:39 PM > To: [email protected] > Subject: [c-nsp] Configuration buffer on 7206 > > Hello folks, > > I just started running in to this error when doing a "copy run start" > command on my 7206VXR: > > ============== > copy run start > Destination filename [startup-config]? > Building configuration... > > % Warning: Saving this config to nvram may corrupt any network management or > security files stored at the end of nvram. > Continue? [no]: no > % Configuration buffer full, can't add command: ntp clock-period 17179886 > %Aborting Save. Compress the config, Save it to flash or Free up space on > device[OK] > ============== > > I've saved my running config to disk0 and to an off site FTP server, but I'm > stumped about how to get the running config to be saved to the > "startup-config" in nvram... > > Our config is pretty large because we have over 1000 VCI's configured on an > ATM DS3 card. > > Any help would be wonderful! > > Thanks, > > -Nick Voth > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > > > ****************************************************************************** > ****** > This footnote confirms that this email message has been scanned by > PineApp Mail-SeCure for the presence of malicious code, vandals & computer > viruses. > ****************************************************************************** > ****** > > > > > > ****************************************************************************** > ****** > This footnote confirms that this email message has been scanned by > PineApp Mail-SeCure for the presence of malicious code, vandals & computer > viruses. > ****************************************************************************** > ****** > > > ************************************************************************************ This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses. ************************************************************************************ ************************************************************************************ This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses. ************************************************************************************ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
