Hello
I would like to boot a Sup720-3BXL in a 7604 chassis, but it won't.
The sup was previously used in a cat6k chassis (as announced by the
bootstrap),
and even with a CompactFlash formatted on a running 7604/720-3BXL, the blade
does not boot.
The compact flash is readable and a 'dir' shows the image, but booting
on it crashes
after a while (there is just the ATA line displayed), and about 30
seconds after, it's
returning to rommon with a weird message (that i can possibly report
here if needed).
Is there a known trick to 'convert' the blade from cat6k to 76xx ?
Thanks a lot for any help
Best regards,
Gregoire Huet
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
