On Thu, 2008-09-04 at 17:17 +0200, Gregoire Huet wrote: > Hello > > I would like to boot a Sup720-3BXL in a 7604 chassis, but it won't. > > The sup was previously used in a cat6k chassis (as announced by the > bootstrap), and even with a CompactFlash formatted on a running > 7604/720-3BXL, the blade does not boot. > > The compact flash is readable and a 'dir' shows the image, but booting > on it crashes after a while (there is just the ATA line displayed), and > about 30 seconds after, it's returning to rommon with a weird message > (that i can possibly report here if needed). > > Is there a known trick to 'convert' the blade from cat6k to 76xx ?
You need at least 12.2(18)SXE for the 7604 chassis. What software version is on the card now? If it's the software, you can insert a flash card with the newer software and boot from that. Regards, Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
