I would think that should support an 7604 chassis. Any chance the IOS is corrupt on the flash? Or the Monlib isn't right. Can you put the card in a working 6500 and verify the IOS image (MD5) and verify via 'show disk0 all' that the monlib stuff is right?
Chuck -----Original Message----- From: Gregoire Huet [mailto:[EMAIL PROTECTED] Sent: Thursday, September 04, 2008 12:40 PM To: Church, Charles Cc: [email protected] Subject: Re: [c-nsp] Moving Sup720 from cat6k to 7600 Church, Charles wrote : > Is it possible you're trying to boot an IOS version that doesn't support > that chassis? I'm sure there is a minimum version for a 7604, and I'm > sure it's more recent than the minimum for the 6500 it came out of. I'm trying to boot c7600s72033-advipservicesk9-mz.122-33.SRC1.bin By the way, i have the trace of the booting process : rommon 7 > reset System Bootstrap, Version 8.5(2) Copyright (c) 1994-2007 by cisco Systems, Inc. Cat6k-Sup720/SP processor with 1048576 Kbytes of main memory rommon 1 > boot disk0: Initializing ATA monitor library... string is disk0:c7600s72033-advipservicesk9-mz.122-33.SRC1.bin Loading image, please wait ... Initializing ATA monitor library... *** Illegal Opcode Exception *** PC = 0x80102ae4, Cause = 0x28, Status Reg = 0x30409003 monitor: command "boot" aborted due to exception rommon 2 > Thank you Greg _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
