Hello, try sh inventory.
Regards, David On 10/2/08, Stephan Lochner <[EMAIL PROTECTED]> wrote: > Hi Group, > > we have a problem with our 7200 series router. We have a supplier that > handles our maintenance contracts. We want now to put some more devices into > maintenance. > Normally we use the "sh ver" command and get the serial number. > But the 7200 series router provide a serial number (I assume of the > mainboard) but this is not that one printed on the back of the router. > Our problem is now that our maintenance supplier is not able to take the > devices into maintenance with this serial. > Is there another way to read the serial number from remote? > > regards > > Stephan > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
