You can also get it via SNMP. .1.3.6.1.4.1.9.3.6.3.0 = Chassis ID (defaults to the serial number of the chassis unless you've configured the 'snmp-server chassis-id <text>' command.
Ken Matlock Network Analyst (303) 467-4671 [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Christian Koch Sent: Thursday, October 02, 2008 5:56 AM To: Stephan Lochner Cc: [email protected] Subject: Re: [c-nsp] problem with serial number on cisco 7200 routers /maintenance contract sh inventory will do it sh snmp will also give you the chassis serial On Thu, Oct 2, 2008 at 5:40 AM, Stephan Lochner <[EMAIL PROTECTED]> wrote: > Hi Group, > > we have a problem with our 7200 series router. We have a supplier that > handles our maintenance contracts. We want now to put some more devices into > maintenance. > Normally we use the "sh ver" command and get the serial number. > But the 7200 series router provide a serial number (I assume of the > mainboard) but this is not that one printed on the back of the router. > Our problem is now that our maintenance supplier is not able to take the > devices into maintenance with this serial. > Is there another way to read the serial number from remote? > > regards > > Stephan > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
