It was a while ago, but If I remember correctly, it did not work on the hwic, only on the integrated ports.
You could pickup a cheap 827 or 837 router on ebay to do the pppoe. Dan. On Wed, Nov 19, 2008 at 11:36 AM, Peter Chuba <[EMAIL PROTECTED]> wrote: > Hi, > > I've got a 2801 whose built-in ports are damaged. I was wondering if I could > add an HWIC-4ESW module and use this to connect to both the provider and > LAN. And will I be able to do NAT with this setup? Will I also be able to do > PPPOE on the vlan interface? I think it should work but want to be sure > before buying the card. > > Thanks > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
