According to the doc if I am using a TX port the DEFAULT is UDLD
DISABLED, so I have to enable it and also it states that I need to run
in AGGRESSIVE MODE when using TX.
I think I read that correct!
Jeff
On Oct 2, 2009, at 11:30 AM, Jeff Fitzwater wrote:
Why do you say "TX does not support UDLD"? The doc and port
configs support it. Am I missing something?
Jeff
On Oct 2, 2009, at 11:14 AM, Nick Hilliard wrote:
[100% agreed on rant. ghods, it is so depressing to fork out for
cisco optics and find that they don't work on other cisco gear].
On 02/10/2009 15:27, Justin Shore wrote:
Back to your question though, yes UDLD should work fine over MCs.
as someone else noted, only for optical transceivers. TX does not
support UDLD (which was what the original poster was wondering
about).
Nick
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
