SXI3 has a number of bug fixes for our network, including one that would cause the next-hop to be populated as 'drop' in hardware.
I strongly recommend using it over prior versions of SXI. Due to the removal of hardware support we replaced the older 63xx/62xx series cards. - Jared On Nov 17, 2009, at 10:22 AM, Rubens Kuhl wrote: > SXI2a running fine with MPLS, QoS, SVIs (no BFD on those... :-(), > OSPF, BGP. PFC3C-only, no WAN cards/modules, no DFC. > > > Rubens > > > > On Tue, Nov 17, 2009 at 12:51 PM, Jeff Fitzwater <[email protected]> wrote: >> I have been running the SXI(3) on a test router with 100M MM 6324, which it >> did not recognize in previous versions, and so far no complaints but then >> again it's not in a real world yet. >> >> >> Does anyone else have GOOD or BAD new on SXI(3)? >> >> >> Jeff Fitzwater >> OIT Network Systems >> Princeton University >> >> >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
