Define breaks. Breaks as in your ssh connection drops and you have to
login again, or breaks as in your ssh connection drops and the ssh
service doesn't restart?
andrew wrote:
Here is some BAD on SXI3 ...
with redundant supervisor, SSH breaks upon supervisor switchover.
-andrew
On Tue, Nov 17, 2009 at 11:34 AM, Jeff Fitzwater <[email protected]> wrote:
The 6324 100 MM is supported but did not come online in SXI 1, 2 , 2A. It did
however work in SXI, which we are running now.
The other flavors are not supported.
Jeff
On Nov 17, 2009, at 12:12 PM, Jared Mauch wrote:
Release 12.2(33)SXH and later releases do not support the following hardware:
These Ethernet Switching Modules:
–WS-X6024-10FL-MT 24-port 10BASE-FL MT-RJ
–WS-X6248A-TEL 48-port 10/100TX RJ-21
–WS-X6248-RJ-45 48-port 10/100TX RJ-45
–WS-X6248-TEL 48-port 10/100TX RJ-21
–WS-X6324-100FX-SM 24-port 100FX Ethernet
–WS-X6224-100FX-MT 24-port 100FX Ethernet Multimode MT-RJ
–WS-X6316-GE-TX 16-port Gigabit Ethernet RJ-45
–WS-X6416-GE-MT 16-Port Gigabit Ethernet MT-RJ
Now, the caveat is that they did not actually remove the hardware support
for some of these until SXI1, so while the release notes say one thing, the
actual support varies.
You will see something like this in 'show power':
4 WS-X6248A-TEL 112.98 2.69 - - on off (not supported)
8 WS-X6248-RJ-45 112.98 2.69 - - on off (not supported)
It does appear the WS-X6324-100FX-MM card does power on for SXI3, but I can't
recall if that was the case for SXI2/2a/or 1.
- Jared
On Nov 17, 2009, at 12:05 PM, Chris Phillips wrote:
Jared,
After quickly glancing at the release notes, I was unable to find anything
about the removal of hardware support for the 63xx series cards. Do you have a
URL or can you be more specific?
Thanks in advance!
Jared Mauch wrote:
SXI3 has a number of bug fixes for our network, including one that would cause
the next-hop to be populated as 'drop' in hardware.
I strongly recommend using it over prior versions of SXI.
Due to the removal of hardware support we replaced the older 63xx/62xx series
cards.
- Jared
On Nov 17, 2009, at 10:22 AM, Rubens Kuhl wrote:
SXI2a running fine with MPLS, QoS, SVIs (no BFD on those... :-(),
OSPF, BGP. PFC3C-only, no WAN cards/modules, no DFC.
Rubens
On Tue, Nov 17, 2009 at 12:51 PM, Jeff Fitzwater <[email protected]> wrote:
I have been running the SXI(3) on a test router with 100M MM 6324, which it did
not recognize in previous versions, and so far no complaints but then again
it's not in a real world yet.
Does anyone else have GOOD or BAD new on SXI(3)?
Jeff Fitzwater
OIT Network Systems
Princeton University
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
--
Chris Phillips
Director of Network Engineering & Peering Coordinator
WBS Connect
[email protected]
(866) WBS-CONX
(720) 259-8361 - direct
(303) 968-4383 - mobile
www.wbsconnect.com
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
