Jared,
After quickly glancing at the release notes, I was unable to find
anything about the removal of hardware support for the 63xx series
cards. Do you have a URL or can you be more specific?
Thanks in advance!
Jared Mauch wrote:
SXI3 has a number of bug fixes for our network, including one that would cause
the next-hop to be populated as 'drop' in hardware.
I strongly recommend using it over prior versions of SXI.
Due to the removal of hardware support we replaced the older 63xx/62xx series
cards.
- Jared
On Nov 17, 2009, at 10:22 AM, Rubens Kuhl wrote:
SXI2a running fine with MPLS, QoS, SVIs (no BFD on those... :-(),
OSPF, BGP. PFC3C-only, no WAN cards/modules, no DFC.
Rubens
On Tue, Nov 17, 2009 at 12:51 PM, Jeff Fitzwater <[email protected]> wrote:
I have been running the SXI(3) on a test router with 100M MM 6324, which it did
not recognize in previous versions, and so far no complaints but then again
it's not in a real world yet.
Does anyone else have GOOD or BAD new on SXI(3)?
Jeff Fitzwater
OIT Network Systems
Princeton University
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
