On Fri, 24 Sep 2010, Jeff Wojciechowski wrote:
We are considering upgrading one of our circuits to a fractional DS3 and would
just like query the experts on the list to make sure that I have all my bases
covered here if we go down the DS3 route as I have never touched DS3 before...
I am considering using the following equipment:
3925 Router + NM-1T3/E3 + SM-NM-ADPTR (per
http://www.cisco.com/en/US/prod/collateral/modules/ps2797/ps4909/product_data_sheet09186a008010fba2_ps282_Products_Data_Sheet.html)
That part seems pretty straightforward (but please correct me if I am wrong).
Can I safely assume that since the carriers proposal doesn't mention ATM that I
don't need NM-1A-T3/E3?
Then from DMARC to my router I need to use 734 type cable with 75 Ohm BNC
connectors (per tread from yesterday).
Am I missing anything?
Depending on your location and connectivity needs, you might want to check
into the availability of an Ethernet service. There is a good chance your
cost per megabit will be somewhat lower, and you won't need to purchase
DS3 interface cards, etc.
jms
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
