On 9/24/2010 4:07 PM, Jay Nakamura wrote: > Unless you have fancy DS3 test set, only way to find out is start > using it. We saw bunch of errors but telco swore up and down that > line was clear. This list clued me into possible hot circuit. Stuck > a attenuator in the Rx side and error disappeared.
Our old DS3 came with the coax-to-RJ45 balun adapters. Rather than attenuate, we stuck a long Cat5 jumper in the middle, worked just as well. This on a 7200VXR. Jeff _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
