Justin- Our carriers managed Ethernet has a max of 6 T1s feeding it (for our location) so that limits us to less than 10Mbps so I think fractional DS3 will be our best bet.
Especially when upgrading from a 4 T bundle to a 10Mbps burstable to 45Mbps DS3 is only ~40% more per month.... Thanks, -Jeff -----Original Message----- From: Justin M. Streiner [mailto:[email protected]] Sent: Friday, September 24, 2010 2:42 PM To: Jeff Wojciechowski Cc: [email protected] Subject: Re: [c-nsp] DS3 Nubie On Fri, 24 Sep 2010, Jeff Wojciechowski wrote: > We are considering upgrading one of our circuits to a fractional DS3 and > would just like query the experts on the list to make sure that I have all my > bases covered here if we go down the DS3 route as I have never touched DS3 > before... > > I am considering using the following equipment: > > 3925 Router + NM-1T3/E3 + SM-NM-ADPTR (per > http://www.cisco.com/en/US/prod/collateral/modules/ps2797/ps4909/produ > ct_data_sheet09186a008010fba2_ps282_Products_Data_Sheet.html) > > That part seems pretty straightforward (but please correct me if I am wrong). > Can I safely assume that since the carriers proposal doesn't mention ATM that > I don't need NM-1A-T3/E3? > > Then from DMARC to my router I need to use 734 type cable with 75 Ohm BNC > connectors (per tread from yesterday). > > Am I missing anything? Depending on your location and connectivity needs, you might want to check into the availability of an Ethernet service. There is a good chance your cost per megabit will be somewhat lower, and you won't need to purchase DS3 interface cards, etc. jms This electronic mail (including any attachments) may contain information that is privileged, confidential, or otherwise protected from disclosure to anyone other than its intended recipient(s). Any dissemination or use of this electronic mail or its contents (including any attachments) by persons other than the intended recipient(s) is strictly prohibited. If you have received this message in error, please delete the original message in its entirety (including any attachments) and notify us immediately by reply email so that we may correct our internal records. Midland Paper Company accepts no responsibility for any loss or damage from use of this electronic mail, including any damage resulting from a computer virus. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
