Thank you all for the help, it seems to be working based on the output from show queueing and show policy-map. We'll do some stress testing on it today.
Thanks!!! Dave -- Dave Weis 515-224-9229 [email protected] http://www.internetsolver.com/ Please check out our Complete Support Service http://www.internetsolver.com/completesupport/ > -----Original Message----- > From: Tony [mailto:[email protected]] > Sent: Monday, December 20, 2010 4:37 PM > To: '[email protected]'; Dave Weis > Subject: Re: [c-nsp] ATM Subinterface QoS > > Hi Dave, > > As others have suggested the shaping is done by the ATM > sub-interface and so you don't need the parent shaper policy > (and as you've found out, you cannot apply this setup). > > The correct config for you would be: > > > interface ATM4/0.605 point-to-point > pvc 5/45 > vbr-nrt 1536 1536 > service-policy out OUTPUT-POLICER > > > > regards, > Tony. > > > > > --- On Tue, 21/12/10, Dave Weis <[email protected]> wrote: > > > From: Dave Weis <[email protected]> > > Subject: [c-nsp] ATM Subinterface QoS > > To: "'[email protected]'" <[email protected]> > > Received: Tuesday, 21 December, 2010, 2:51 AM > > > > I'm trying to get QoS on a subinterface of an OC3 to work > correctly. I > > have been able to get it working for PPPoA interfaces in > the past but > > the same method isn't working for me. > > > > This is how I have things declared: > > > > class-map match-all VOIP-TRAFFIC > > match access-group name MY-VOICE > > ! > > ! > > policy-map OUTPUT-POLICER > > class VOIP-TRAFFIC > > priority 100 > > set dscp ef > > class class-default > > fair-queue > > policy-map MAP-1536-OUT > > class class-default > > shape average 1536000 > > service-policy OUTPUT-POLICER > > policy-map MAP-3072-OUT > > class class-default > > shape average 3072000 > > service-policy OUTPUT-POLICER > > policy-map MAP-256-OUT > > class class-default > > shape average 256000 > > service-policy OUTPUT-POLICER > > > > ip access-list standard EVERYTHING > > permit any > > ! > > ip access-list extended MY-VOICE > > permit ip x.x.x.0 0.0.0.63 any > > > > interface ATM4/0.605 point-to-point > > description FCP 3 Admin > > ip address 192.168.110.9 255.255.255.252 pvc 5/45 > > protocol ip 192.168.110.10 > > broadcast > > encapsulation aal5snap > > ! > > > > Trying to add service-policy output MAP-1536-OUT to the > subinterface > > gives me the error GTS : Not supported on this interface If > I add it > > to the PVC I get the error GTS : Not supported over ATM VCs > > > > Thanks for any help. I have done a lot of research and googling but > > have not had any luck finding something that will work for > me. This is > > running on a 7200 12.4 with a PA-A3-OC3SMI and a NPE-GE1. > > > > Dave > > > > > > > > > > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
