You can configure up to 16 HSRP Standby Groups on a Sup2/PFC2
> Date: Tue, 15 Mar 2011 16:12:28 +1100
> From: [email protected]
> To: [email protected]
> CC: [email protected]
> Subject: Re: [c-nsp] sup2 VRRP/HSRP limits
>
> Thanks Mack,
> Does anyone have an information on how many interfaces running HSRP could
> be configured on a sup2 before the load would become unworkable?
> Thanks,
> Andrew
>
> On Tue, 8 Mar 2011 10:53:07 -0800, Mack McBride <[email protected]>
> wrote:
> > Different code trains have different limits on HSRP sessions.
> > This is in addition to what may be imposed for different Supervisor
> > engines.
> > If you have too many for the supervisor load they will become unstable.
> >
> > Mack McBride
> > Network Architect
> >
> > -----Original Message-----
> > From: [email protected]
> > [mailto:[email protected]] On Behalf Of Andrew Jones
> > Sent: Monday, March 07, 2011 5:48 PM
> > To: Cisco NSP
> > Subject: [c-nsp] sup2 VRRP/HSRP limits
> >
> > Hi All,
> > What is the maximum number of VRRP groups which can be configured on a
> > 6500/sup2? I've found that the limit for HSRP seems to be 256. Do these
> > limits increase on the SUP720-3BXL?
> >
> > I'm trying to use a pair of 6500s as the default gateway for a couple of
> > thousand VLANs, and am looking at options for redundancy.
> > Thanks,
> > Andrew
> > _______________________________________________
> > cisco-nsp mailing list [email protected]
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> _______________________________________________
> cisco-nsp mailing list [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
