On 9/20/12 1:52 PM, Joseph Mays wrote: > I'm replacing a Cisco 2900XL running 12.0(5)WC13 with a Cisco 2960 running > 12.2(25r)FX. I just cut and pasted the config from the 2900 into the 2960, > and it all seemed to work fine, except the new IOS on the 2960 does not > accept one command -- > > > Enter configuration commands, one per line. End with CNTL/Z. > sw1.dist(config)#interface FastEthernet0/1 > sw1.dist(config-if)# description Trunk port to gw1.dist.win.net > sw1.dist(config-if)# duplex full > sw1.dist(config-if)# speed 100 > sw1.dist(config-if)# switchport trunk encapsulation dot1q > ^ > % Invalid input detected at '^' marker. >
That's because it only does dot1q, so there's no option for encap. ~Seth _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
