On 9/21/12 8:56 AM, Jon Lewis wrote: > On Fri, 21 Sep 2012, Joseph Mays wrote: > >> interface FastEthernet0/22 >> description Trunk to sw2.dist.win.net >> duplex full >> speed 100 >> switchport access vlan 22 >> switchport trunk allowed vlan 1,201-224,1002-1005 >> switchport mode trunk >> no cdp enable >> >> The client on the remote switch, vlan 202, does not work through the >> new switch. On sw2 the uplink port is port 5, the client is on port 6. >> >> I don't know what might be causing this, unless something about the >> vlan database is not created by cutting and pasting the config from >> the 2900XL to the 2960. > > Did you create the vlans on the 2960? The vlans allowed on that port > (other than 1) aren't going to work until/unless the 2960 knows those > vlans exist. This info was probably hidden in the vlan database (not > present in the running/startup config) on the 2900. >
Yeah, on the 2900XL the vlan database was separate from the running/startup config. On newer switches it's "vlan X" in config. ~Seth _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
