On Fri, Sep 21, 2012 at 10:48 AM, Joseph Mays <[email protected]> wrote:
> Well, I did the switch from the 2900 to the 2960, everything works fine > except for one thing... > > Port 22 on the original switch is set to be a vlan trunk that links to > another switch (sw2, also a 2900XL) in another building with a different > set of vlans on it. > > interface FastEthernet0/22 > description Trunk to sw2.dist.win.net > duplex full > speed 100 > switchport access vlan 22 > switchport trunk encapsulation dot1q > switchport trunk allowed vlan 1,201-224,1002-1005 > switchport mode trunk > no cdp enable > > One the new switch the config is the same except, of course, the encaps > line is gone. > > interface FastEthernet0/22 > description Trunk to sw2.dist.win.net > duplex full > speed 100 > switchport access vlan 22 > switchport trunk allowed vlan 1,201-224,1002-1005 > switchport mode trunk > no cdp enable > > The client on the remote switch, vlan 202, does not work through the new > switch. On sw2 the uplink port is port 5, the client is on port 6. > > interface FastEthernet0/5 > description Trunk port to sw1.dist.win.net > duplex full > speed 100 > switchport trunk encapsulation dot1q > switchport trunk allowed vlan 1,201-224,1002-1005 > switchport mode trunk > no cdp enable > ! > interface FastEthernet0/6 > description Reese Design Collaborative, 600 Distillery Ste 200 > switchport access vlan 202 > spanning-tree portfast > no cdp enable > > On the old switch they have no problem pinging their gateway address, the > vlan interface on the router. On the new switch, they cannot. > > I don't know what might be causing this, unless something about the vlan > database is not created by cutting and pasting the config from the 2900XL > to the 2960. > > Check if the VLANs were created on the 2960, also, you will need to specify the native VLAN on the trunk port. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
