Hi Adam, I don't have the xconnect command under the bdi interface :
RTI-MPLS-SAB-01(config)#interface BDI4093 RTI-MPLS-SAB-01(config-if)#xconnect ? % Unrecognized command I'm using ASR1001X , ves 03.13.01.S Any thought ? # - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - # - - Nicolas KARP # - - Network and Security Engineer # - - Email : [email protected] <[email protected]> # - - Linkedin : http://www.linkedin.com/in/nicolaskarp # - - Viadeo : http://www.viadeo.com/fr/profile/nicolas.karp <http://www.viadeo.com/fr/profile/nicolas.karp%20> # - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2014-12-03 10:21 GMT+01:00 Vitkovský Adam <[email protected]>: > Hi Nicolas, > > This is the config for mixing EFPs and PWs in a common BD + IP interface > for the BD. > Manual hub and spoke type of configuration with IP address + VFR at the > hub location. > > interface TenGigabitEthernet0/3 > mtu 9000 > service instance 8000 ethernet > description CUSTOMER-B > encapsulation dot1q 20,30,40 > rewrite ingress tag pop 1 symmetric > bridge-domain 8000 > > interface BDI8000 > mtu 9000 > vrf CUST-B > ip add 192.0.2.1 255.255.255.0 > xconnect vfi CUST-B-BD > > l2 vfi CUST-B-BD manual > vpn id 1 > neighbor 10.0.1.3 100 encapsulation mpls > neighbor 10.0.1.4 200 encapsulation mpls > neighbor 10.0.1.5 300 encapsulation mpls > > Spokes would have just EFPs with xconnect. > > > adam > > -----Original Message----- > > From: cisco-nsp [mailto:[email protected]] On Behalf Of > > Nicolas KARP > > Sent: Tuesday, December 02, 2014 6:03 PM > > To: [email protected] > > Subject: [c-nsp] ASR 1K : EFP / XCONNECT / BDI > > > > Hi, > > > > I need to interconnect 2 platforms on 2 different datacenters. > > > > The idea is to create several EFPs on each PE (one at each side) and > create a > > default xconnect pw in order to encapsulate the layer2 traffic over our > MPLS > > network. I also have some layer 3 interfaces for different vlans which > need to > > be used on both datacenters : > > > > > > *PE1 : (same config on PE2, except for the BDI interface)* > > > > > > *interface GigabitEthernet0/0/4* > > * no ip address* > > * load-interval 30* > > * negotiation auto* > > > > *## default XCONNECT to DC2* > > * service instance 1 ethernet* > > * encapsulation default* > > * xconnect 1.1.1.1 9999 encapsulation mpls pw-class EOMPLS-ETH-TO-VLAN* > > * !* > > > > *## Layer 3 interface via BDI* > > * service instance 4093 ethernet* > > * encapsulation dot1q 4093 exact* > > * rewrite ingress tag pop 1 symmetric* > > * bridge-domain 4093* > > * !* > > > > *interface BDI4093* > > * ip vrf forwarding TEST2* > > * ip address 172.31.0.253 255.255.255.0* > > * standby 1 ip 172.31.0.254* > > * standby 1 priority 110* > > * standby 1 preempt delay minimum 60* > > *end* > > > > *--> I'm missing a xconnect for the vlan 4093...* > > > > > > How can I create a layer3 interface and run a xconnect on the same EFP ? > > The idea would be to use the same vlans at both locations and terminate > the > > Layer3 on a BDI interface in Datacenter1. > > > > Do you think it's possible ? > > I'm not too sure if i'm really clear. Don't hesitate to ask me if you > have any > > questions :) > > > > Many Thanks for your help ! > > > > # - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - > - - > > - - - - - - - - - - - - - - - - - - - > > # - - Nicolas KARP > > # - - Network and Security Engineer > > # - - Email : [email protected] <[email protected]> > > # - - Linkedin : http://www.linkedin.com/in/nicolaskarp > > # - - Viadeo : http://www.viadeo.com/fr/profile/nicolas.karp > > <http://www.viadeo.com/fr/profile/nicolas.karp%20> > > # - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - > - - > > - - - - - - - - - - - - - - - - - - - > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
