Have you tried swapping the two interfaces between the chassis? Sent from a mobile device
> On 21 Apr 2015, at 01:16, Jeroen van Ingen <[email protected]> wrote: > > Hi, > >> Haven't followed this thread too carefully, so I apologize if I >> duplicated anyone's suggestion: >> >> Have you checked for: >> >> 1) Are these systems setup for NHRP (hsrp, glbp, vrrp)? If so, is >> the box that is having the issue the active node? > > Running HSRP, but doesn't make a difference which of the two routers is > active. The second router is currently active for all interfaces and groups. > >> 2) Are you running PIM? Is this box the DR? > > Yes, running PIM-SM. This box is DR on some subinterfaces and not on a few > others, but changing DR priority doesn't seem to make a difference. > >> 3) Have you checked to see if there is traffic headed to the box, >> rather than through it that is causing the issue? > > I don't see how it could be related to any traffic coming into the > interfaces, because the interfaces are programmed to handle certain features > in software even when they are not receiving any traffic. > > > Regards, > > Jeroen van Ingen > ICT Service Centre > University of Twente, P.O.Box 217, 7500 AE Enschede, The Netherlands > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
