On 13 July 2016 at 13:13, Olivier CALVANO <[email protected]> wrote: > Hi > > i don't have the configuration of the other side, on my side : > > interface Port-channel1 > switchport trunk encapsulation dot1q > switchport mode trunk > > > interface GigabitEthernet1/0/1 > switchport trunk encapsulation dot1q > switchport mode trunk > channel-group 1 mode active
Just one local interface in the bundle? You are probably going to need the far side config to bottom this out. Cheers, James. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
